Architectural precision downlighting permits impressive desert home design to speak for alone

A mix of gorgeous design, a impressive desert location, and extraordinary architectural lights is a profitable blend for a private home just outdoors of St. George, Utah.

JRC Lighting was hired by the home-owner to create the lighting idea for the showpiece home.

“The home has an pretty much industrial seem to it, with a aim on clean up lines,” reported Kevin Meredith, principal at JRC Lights. “My objective was to retain the lighting understated and permit the architecture, and the sights, provide by themselves.”

Aculux AX4SQ precision recessed downlights had been selected to deliver ambient illumination during the home. The more substantial 4″ aperture was chosen to enhance the industrial feel of the rooms. An prospect to use luminaires with sq. housing was also a huge advertising point for both of those Meredith and the owner for the reason that the square strains labored so perfectly with the architecture.

With a target on developing silent ceilings, all luminaires attribute a flangeless bevel, and trim colours change to match ceiling finishes. White trims mix seamlessly with the predominantly white 10-foot ceilings. Black overhangs in the entrance and outdoor lounge regions gain from black-trimmed fixtures.

One particular of the most tough spots of the job was the thick wooden ceilings in the kitchen and pick hallways. Putting in flangeless fixtures in a wood ceiling, significantly square ones, can be tricky due to the fact there is no space for mistake. Each and every gap ought to be minimize perfectly.

“Aculux makes it a lot less difficult than other suppliers to function with flangeless luminaires,” reported Meredith. “The wood ceiling adapter permitted the contractor to trace and lower prior to the set up. And then he was equipped to only adjust the adapter within just the housing as necessary.”

The contractor also took gain of Aculux’s Tru-Line™ Precision Set up ability to precisely align the sq. trims for each and every luminaire and from fixture to fixture along the ceiling.

With a variety of ceiling spans and heights during the home, it was needed to map out the lumen output prerequisites to make certain the end result would be uniform illumination across the area. With Aculux’s extensive lumen choices for a given fixture, unique lumen deals have been specified for each AX4SQ luminaire although keeping the 4” sq. aesthetic throughout. And Aculux’s two-step binning makes sure coloration regularity throughout the fixtures, which is an additional aspect contributing to tranquil ceilings all through the home.

Opinions has been overwhelmingly positive for the lights layout, starting with the home-owner. During an annual St. George space home exhibit, in which the property was showcased, the contractor was onsite and reported that a considerable number of guests commented specially on the exceptional lighting.

“My objective in a undertaking like this is to let the fixtures vanish into the architecture,” Meredith mentioned. “The Aculux downlights properly highlight the very best options of this home without using away from the architecture or the sights.”

Challenge Title: Non-public Residence

Area: St. George, Utah, United states

Lighting Style: JRC Lights

Agent: JRC Lighting

Concluded: February 2020

Photographer: Endeavour Architectural Photography


Jason Broadhurst – Aculux, an Acuity Brands business


[email protected]

Net web site: