The meaning of the steel roof deck system is a material that can function as a substitute media for conventional material in the form of a wide board such as plywood. Usually, steel floor deck is used for the base in the process of making the floor and roof of the concrete deck. The fabricator is a galvanized steel plate fitted with bone.

Steel floor deck has a wavy shape and the size is always the same ie five centimeters. For the length and width, there are several variations, so when choosing can be adjusted to the needs or size of the area that would be given a deck.

Compared to plywood or other materials used to make decks, there are several advantages of steel floor decks that no owned by other materials. The first is that this material can be stored in a small space only, tideck needs to be large because it can be stacked together.

For deck making, if wearing stell floor deck can save the use of reinforcing steel on the floor plate. If the size of the larger and wider, of course the cost must also be much more efficient. In addition, if the tideck is enabled, it can be used as a temporary workbench or propping up to a size of 2.2 meters for continuous spans. The point is that the use of tempopary support or temporary support can be reduced and the space under the floor is wider.

If the plywood can burn, but for the stell floor deck is guaranteed to have fire-retardant properties. Even in laboratory tests ever conducted, this material is set to meet all required standards of equality. In addition stell floor deck can also be applied on the floor or diahfrahma in buildings and buildings of high size and consists of dozens of floors.

Use of stell floor deck can also make the process of making and deck making it easier to do. Either when in the process of preparation or the process of taming directly. This makes the deck maker faster so there is considerable time efficiency.

The efficiency of this time will also affect the financing side and the number of workers. And more importantly, using the stell floor deck, the use of other materials such as cement, sand, formwork to scaffolding can also be saved. According to experience, the austerity rate can reach twenty-five to thirty percent. Certainly a saving value that tideck a little.